Okuma 2018 Multus U3000-2SW
Replacement cost over $700,000
Specifications:
Swing Over Bed: 25.59″
Max Cutting Diameter: 25.59″
Distance Between Centers: 74.33″
X-Axis Travel: 25.39″
Y-Axis Travel: 9.84″ (+/-4.92″)
Z-Axis Travel: 62.99″
C-Axis Indexing: 360 Degrees
Chuck Size: 10″
Bar Capacity: 3.188″
Spindle Bore: 3.58″
Spindle Nose: A2-8
Spindle Motor: 30 HP
Spindle Speed; 4,200 RPM
Rapid Traverse Rate: X-Axis: 1,968 In/Min.
Rapid Traverse Rate: Y-Axis: 1,575 In/Min.
Rapid Traverse Rate: Z-Axis: 1,968 In/Min.
Sub Spindle: Yes
Sub Spindle Chuck Size: 10″
Sub Spindle Bar Capacity: 2.04″
Sub Spindle Spindle Bore: 2.44″
Sub Spindle Spindle Nose: A2-6
Sub Spindle Spindle Motor 30 HP
Sub Spindle Spindle Speed: 5,000 RPM
Sub Spindle / W-Axis Travel: 53.52″
Turret 2 X-Axis Travel: 9.25″
Turret 2 Z-Axis Travel: 57.52″
B-Axis Spindle Motor: 30 HP
B-Axis Milling Speed: 12,000 RPM
B-Axis Spindle Taper: Capto C6
B-Axis Tool Positions: 40
B-Axis Rotation: 240 Degrees (-30 To +210)
Turret Capacity: 12
Turret Type: BMT65
Y-Axis: Yes
Dimensions: 213.6″ X 117.9″ X 116.3″
Weight: 35640 LBS
Okuma OSP-P300SA Thinc CNC Control
Big Bore Option (3.58″ Bore)
LNS Quick Load Servo 80 S2 Automatic Magazine Loader
Capacity From 1/4″ To 3-1/8″
63″ Length Capable
LNS Blaze Air U48 Unloader
Okuma Unloader Interface
LNS MH500 Custom Extended Length Conveyor To Clear Blaze Air Unloader
(2) 10″ Smw Autoblok 260MM 3-Jaw Chucks Main & Sub
Parts Catcher 2S Main Side
B-Axis Fully Contouring (NC-B), H1 “Turret”
B-Axis Capto C6 40 Station ATC
(1) Tool Probe Touchsetter “A” For 2S
(1) Renishaw Work Probe Rmp60 Capto C6
5-Axis Machining Kit:
* Super Nurbs (X+Y+Z+C+B)
* Tool Center Point Control II
* Tool Point Center Manual Feed
* Tool Posture Command
Mp Systems RF8 Twin 8 GPM High Pressure Coolant System
4 GB RAM
120 GB SSD Hard Drive
2 Usb Ports
2 Ethernet Interface Ports
RS-232-C Interface
10 MB Program Capacity
3DVM
5-Axis Auto-Tuning
Collision Avoidance System (CAS)
Extended Common Variables 200 Sets
Lathe Tool Index Function Multi-Edge
Lap 4, Nose-R 2B, User Task 2, 3D Animation
Hours Of Use As Of May 16, 2023:
Power On Time: 9,094 Hours
Nc Running Time: 1,835 Hours
Spindle Revolution: 1,085 Hours
Cutting Time: 1,610 Hours
Included In Sale:
Good Assortment Of Misc. Tool Holders For Milling Head And Turret (As Pictured, And List Available)
For more information or to sell a machine call us at (201) 315-4807