CMS AQUATEC 3040
13′ x 22′ CMS Aquatec 3400 + 3400 5-Axis Twin Table CNC Waterjet System
New: 2017
Specifications:
| X Axis stroke 4020/ 158 Mm (“) | Dynamic precision + / – 0,10 mm |
| Y Axis stroke TO BE DEFINED mm(“) Approx 22’ | Repeatability “ Ps” + / – 0,025 mm |
| Z Axis stroke 530/ mm(“) | Power 13 kW |
| X axes max feedrate 54000 mm/ min | Total Size LxDxH (with light barriers) TO BE DEFINED mm |
| Y axes max feedrate 54000 mm/ min | Weight TO BE DEFINED Kg |
| Z axes max feedrate 12600 mm/ min | B Axis +/- 60 ° |
| X acceleration 2 m/ s2 | C Axis +/- 340 ° |
| Y acceleration 2 m/ s2 | B axes max feedrate 17200 °/min |
| Z acceleration 1 m/ s2 | C axes max feedrate 13400 °/min |
| XY Worktable area regular table 4000 x 2000(157.4 x 78.7) mm(“) | B acceleration 1450 °/s2 |
| XY Worktable area regular table 4000 x 3000(157.4 x 118.1) mm(“) | C acceleration 850 °/s2 |
| Loading capacity 1000 Kg/ m2 |
WORKING IN AREA 1 (2) AND LOADING/UNLOADING AREA 2 (1)
The machine allows to stop the photocells in area 2 (1) without interrupting the working operations in area 1 (2) only in the working unit is in area 1 (2), with photocells between the tanks activated.
The safety is granted by the photocells and the area limit switches avoiding the working unit to enter the area 2 (1) for loading/unloading.
Working area n°1 (front side)
X = 4000mm (X=0 right limit – X=-4000 left limit)
Y / V = 3000mm (Y=0 front limit – Y= to be defined rear limit)
Working area n°2 (rear side)
X = 4000mm (X=0 right limit – X=-4000 left limit)
Y / V = 3000mm (Y=3300 front limit – Y= to be defined rear limit)
PRESSURIZED ABRASIVE CONVEYING SYSTEM (330 KG
NUMERICAL CONTROL OSAI OPEN-M
PORTABLE CONTROL UNIT WITH REMOTE COMMANDS UP TO 6 AXES
DREDGE FOR ABRASIVE REMOVAL FROM THE TANK: 1ST DREDGE FOR 3040 TANK AND 2ND DREDGE FOR 3040 TANK
PROGRAMMING SOFTWARE EASYJET 5 AXES
It is a CAD/CAM software package installed in a personal computer working in Windows for the generation of work programs.
QTY (1) DDX PHOTO LICENSE & QTY (2) CAMERA IN ENCLOSURE & QTY (2) CAMERA STANDS
HIGH PRESSURE INTENSIFIER POWER 60 HP – PRESSURE 4130 BAR
JETPOWER EVO TECHNICAL FEATURES
Installed Power 60 (45) HP (kW)
Voltage (three-phase) 400 ± 5% Volt 50 – 60 Hz
Max water pressure 413,7 Mpa (60.000 PSI)
Max flow rate 5 (1.32) liters/minute (gal/min)
Water consumption from 0 to 5 (1.32) lliters/minute (gal/min)
Max diameter of the orifice 0,40 millimeters
Oil tank capacity 250 (39.6) liters (gal)
Cooling requirements Oil/water heat exchanger* 3.2 gal/min water @ max 70ºF *
Dimensions 36″ (900) x 59″ (1500) x 58″ (1560) H Inch/millimeters
Weight 1350 kg
Notes:
This machine replaces for over $550,000 today has low hours use and is immediately available.
For application assistace contact CMS America, Mr. Roberto Impellitiere 616-250-5380
For more information or to sell a machine call us at (201) 315-4807